Apc Serial Connection
Feb 11, 2011 I know it sounds simple, and it sounds like ANYONE should be able to do this but I cannot. I have attempted to connect via serial cable (the APC serial cable none-the-less that I had to purchase because you can ONLY use APC serial cables.) Once connected with the serial cable, I opened hyperterminal with the suggested settings and no luck. I am trying to access the management interface for a APC UPS using the serial port. I used both the serial and USB cables which came with the UPS. I ordered two of these UPS, I connected one to. APC’s next-generation Connected Smart-UPS enables you to monitor your power infrastructure online, anytime - anywhere - from our secure SmartConnect web portal. The Connected Smart-UPS with a dedicated SmartConnect™ Ethernet Port makes set up easy. Apply the port settings to establish the connection. Press 3-5 times to display the username prompt. Use the default username and password of 'apc' You are now in the control console. Fabfilter total bundle keygen. Choose 'Network' Choose 'TCP/IP' Choose 'Boot mode' Change Boot mode to 'Manual' Set the system IP, subnet mask, and default gateway. Accept changes.
I am trying to access the management interface for a APC UPS using the serial port.I used both the serial and USB cables which came with the UPS.
I ordered two of these UPS, I connected one to Server 2008 R2 machine and the other to a Windows 7 PC.
In both cases, they are visible from the Device Manager.
Under Batteries, it is listed as 'APC UPS'
Under Human Interface Devices, it is listed as 'American Power Conversion USB UPS'
I then try to connect using Putty with the following settings:Baud: 9600
Data Bits: 8Parity: None
Stop bits: 1
Flow Control: None
I reach a black terminal windows with a blinking green cursor but I cannot do anything.
Pressing Enter or any other keys does nothing.
I've also tried changing the Baud to 2400 and the other available Flow Control settings with no luck.